Input Data Sets
You can read raw data (counts of nonconforming items) from
a DATA= data set specified in the PROC SHEWHART statement.
Each process specified
in the PCHART statement must be a SAS variable in the DATA= data set.
This variable provides counts for
subgroup samples indexed by the
values of the subgroupvariable.
The subgroupvariable, which is specified
in the PCHART statement, must also be a SAS variable in the
DATA= data set.
Each observation in a DATA= data set must contain a count
for each process and a value for the subgroupvariable.
The data set must contain one observation for each subgroup.
Note that you can specify the DATAUNIT= option in the PCHART statement
to read proportions or percentages of nonconforming items instead of
counts.
Other variables that can be read from a DATA= data set include
 _PHASE_ (if the READPHASES= option is specified)
 blockvariables
 symbolvariable
 BY variables
 ID variables
When you use a DATA= data set with the PCHART statement,
the SUBGROUPN= option (which specifies the subgroup sample size)
is required.
By default, the SHEWHART procedure reads all of the observations in a
DATA= data set.
However, if the data set includes the variable
_PHASE_, you can read selected groups of observations (referred to
as phases) by specifying the READPHASES= option
(for an example, see "Displaying Stratification in Phases").
For an example of a DATA= data set, see
"Creating p Charts from Count Data".
You can read preestablished control limits (or parameters from which
the control limits can be calculated) from a LIMITS= data set
specified in the PROC SHEWHART statement.
For example, the following
statements read control limit information from the data set
CONLIMS:^{*}
proc shewhart data=info limits=conlims;
pchart rejects*batch / subgroupn= 100;
run;
The LIMITS= data set can be an OUTLIMITS= data set that was created in
a previous run of the SHEWHART procedure. Such data sets always
contain the variables required for a LIMITS= data set. The LIMITS=
data set can also be created directly using a DATA step.
When you create a LIMITS= data set, you must provide
one of the following:
 the variables _LCLP_, _P_, and _UCLP_,
which specify the control limits directly
 the variable _P_, without providing _LCLP_ and _UCLP_.
The value of _P_ is used
to calculate the control limits
according to the equations
at "Control Limits" .
In addition, note the following:
 The variables _VAR_ and _SUBGRP_ are required.
These must be character variables of length 8.
 The variable _INDEX_ is required if you specify the
READINDEX= option; this must be a character variable
of length 16.
 The variables _LIMITN_, _SIGMAS_ (or _ALPHA_), and
_TYPE_ are optional, but they are recommended to maintain
a complete set of control limit information.
The variable _TYPE_ must be a character variable of length
8; valid values are ESTIMATE and STANDARD.
 BY variables are required if specified with a BY statement.
For an example,
see "Reading Preestablished Control Limits".
You can read subgroup summary statistics
from a HISTORY= data set specified in the
PROC SHEWHART statement. This allows you to reuse OUTHISTORY= data
sets that have been created in previous runs of the SHEWHART
procedure or to create your own HISTORY= data set.
A HISTORY= data set used with the PCHART statement
must contain the following:
 the subgroupvariable
 a subgroup proportion of nonconforming items
variable for each process
 a subgroup sample size variable for each process
The names of the proportion sample size variables
must be the process name concatenated with the
special suffix characters P and N, respectively.
For example, consider the following statements:
proc shewhart history=summary;
pchart (rework rejected)*batch / subgroupn=50;
run;
The data set SUMMARY must include the variables BATCH,
REWORKP, REWORKN, REJETEDP, and REJETEDN.
Note that if you specify a process name that contains eight
characters, the names of the summary variables must
be formed from the first four
characters and the last three characters of the process
name, suffixed with the appropriate character.
Other variables that can be read from a HISTORY= data set include
 _PHASE_ (if the READPHASES= option is specified)
 blockvariables
 symbolvariable
 BY variables
 ID variables
By default, the SHEWHART procedure reads all of the observations in a HISTORY=
data set. However, if the data set includes the
variable _PHASE_, you can read selected groups of observations
(referred to as phases)
by specifying the READPHASES= option
(see "Displaying Stratification in Phases"
for an example).
For an example of a HISTORY= data set,
see "Creating p Charts from Summary Data".
You can read summary statistics and control limits from
a TABLE= data set specified in the PROC SHEWHART statement.
This enables you to reuse an OUTTABLE= data set created
in a previous run of the SHEWHART procedure.
Because the SHEWHART procedure
simply displays the information read from a TABLE= data set, you can
use TABLE= data sets to create specialized control charts.
Examples are provided in Chapter 49, "Specialized Control Charts."
The following table lists the variables required in a TABLE= data set
used with the PCHART statement:
Table 38.23: Variables Required in a TABLE= Data Set
Variable

Description

_LCLP_  lower control limit for proportion of nonconforming items 
_LIMITN_  nominal sample size associated with the control limits 
_P_  average proportion of nonconforming items 
subgroupvariable  values of the subgroupvariable 
_SUBN_  subgroup sample size 
_SUBP_  subgroup proportion of nonconforming items 
_UCLP_  upper control limit for proportion of nonconforming items 
Other variables that can be read from a TABLE= data set include
 blockvariables
 symbolvariable
 BY variables
 ID variables
 _PHASE_ (if the READPHASES= option is specified).
This variable must be a character variable of length 16.
 _TESTS_ (if the TESTS= option is specified). This variable
is used to flag tests for special causes and must be
a character variable of length 8.
 _VAR_. This variable is
required if more than one process is specified
or if the data set contains information for more
than one process. This variable must be a character
variable of length 8.
For an example of a TABLE= data set, see
"Saving Control Limits".
Copyright © 1999 by SAS Institute Inc., Cary, NC, USA. All rights reserved.