Book Contents |
Previous |
Next |

SAS/QC User's Guide |

Anderson, T. W. and Darling, D. A. (1954),
"A Test of Goodness-of-Fit,"
*Journal of the American Statistical Association*,
49, 765 -769.

ASQC/AIAG Task Force (1991),
*Fundamental Process Control, Reference Manual*,
published by the Automotive Division of the American
Society for Quality Control Supplier Quality Requirements
Task Force, in collaboration with the Automotive Industry
Action Group.

Bissell, A. F. (1990),
"How Reliable is Your Capability Index?"
*Applied Statistics*, 30, 331 -340.

Blom, G. (1958),
*Statistical Estimates and Transformed Beta Variables*,
New York: John Wiley & Sons, Inc.

Bothe, D. R. (1997),
*Measuring Process Capability*,
New York: McGraw-Hill.

Bowman, K. O. and Shenton, L. R. (1983),
"Johnson's System of Distributions",
in *Encyclopedia of Statistical Sciences, Volume 4*
edited by S. Kotz, N. L. Johnson, and C. B. Read.
New York: John Wiley & Sons, Inc. 303 -314.

Boyles R. A. (1991),
"The Taguchi Capability Index,"
*Journal of Quality Technology*, 23, 107 -126.

Boyles, R. A. (1992),
"*C*_{pm} for Asymmetrical Tolerances",
*Technical Report*,
Portland, Oregon: Precision Castparts Corp.

Chambers, J. M., Cleveland, W. S., Kleiner, B., and
Tukey, P. A. (1983), *Graphical Methods for Data
Analysis*, Belmont, CA: Wadsworth International Group.

Chan, L. K., Cheng, S. W., and Spiring, F. A.
(1990),
"A New Measure of Process Capability: Cpm,"
*Journal of Quality Technology*, 30, 162 -175.

Chan, L. K., Xiong, Z. and Zhang, D. (1990),
"On the Asymptotic Distributions of Some Process
Capability Indices,"
*Communications in Statistics--Theory and Methods*,
19, 11dashtwo18.

Chou Y., Owen D. B., Borrego S. A. (1990),
"Lower Confidence Limits on Process Capability Indices,"
*Journal of Quality Technology*, 22, 223 -229.
Corrigenda, 24, 251.

Cohen, A. C. (1951),
"Estimating Parameters of Logarithmic-Normal
Distributions by Maximum Likelihood,"
*Journal of the American Statistical Association*,
46, 206 -212.

Conover, W. J. (1980),
*Practical Nonparametric Statistics, 2nd Edition*,
New York: John Wiley & Sons, Inc.

Croux, C. and Rousseeuw, P. J. (1992),
"Time-Efficient Algorithms for Two Highly Robust
estimators of Scale,"
*Computational Statistics*, 1, 411 -428.

D'Agostino, R. B. and Stephens, M. A., eds. (1986),
*Goodness-of-Fit Techniques*,
New York: Marcel Dekker, Inc.

Dixon, W. J. and Tukey, J. W. (1968),
"Approximate Behavior of the Distribution
of Winsorized *t* (Trimming/Winsorization 2),"
*Technometrics*,
10, 83 -98.

Elderton, W. P. and Johnson, N. L. (1969),
*Systems of Frequency Curves*,
Cambridge University Press.

Ekvall, D. N. and Juran, J. M. (1974),
"Manufacturing Planning,"
*Quality Control Handbook, Third Edition*,
New York: McGraw-Hill.

Elandt, R. C. (1961),
"The Folded Normal
Distribution: Two Methods of Estimating Parameters
from Moments,"
*Technometrics*, 3, 551 -562.

Fisher, R. A. (1973),
*Statistical Methods for Research Workers, 14th Edition*,
New York: Hafner Publishing Company.

Fowlkes, E. B. (1987),
*A Folio of Distributions: A Collection of Theoretical
Quantile-Quantile Plots*, New York: Marcel Dekker, Inc.

Gnanadesikan, R. (1997),
*Statistical Data Analysis of Multivariate Observations*,
New York: John Wiley & Sons, Inc.

Guirguis, G. H. and Rodriguez, R. N. (1992),
"Computation of Owen's Q Function Applied to
Process Capability Analysis,"
*Journal of Quality Technology*, 24, 236 -246.

Hahn, G. J. (1969),
"Factors for Calculating Two-Sided Prediction
Intervals for Samples from a Normal Distribution,"
*Journal of the American Statistical Association*,
64, 878 -898.

Hahn, G. J. (1970a),
"Additional Factors for Calculating Prediction
Intervals for Samples from a Normal Distribution,"
*Journal of the American Statistical Association*,
65, 1668 -1676.

Hahn, G. J. (1970b),
"Statistical Intervals for a Normal Population,
Part I. Tables, Examples and Applications,"
*Journal of Quality Technology*,
2, 115 -125.

Hahn, G. J. (1970c),
"Statistical Intervals for a Normal Population,
Part II. Formulas, Assumptions, Some Derivations,"
*Journal of Quality Technology*,
2, 115 -125.

Hahn, G. J. and Meeker, W. Q. (1991),
*Statistical Intervals: A Guide for Practitioners*,
New York: John Wiley & Sons, Inc.

Hampel, F. R. (1974),
"The Influence Curve and Its Role in Robust Estimation",
*Journal of the American Statistical Association*,
69, 383 -393.

Iman, R. L. (1974),
"Use of a *t*-statistic as an Approximation to the
Exact Distribution of the Wilcoxon Signed Rank Statistic,"
*Communications in Statistics*,
3, 795 -806.

Johnson, N. L., Kotz, S., and Balakrishnan, N. (1994),
*Continuous Univariate Distributions -1, Second Edition*, New York:
John Wiley & Sons, Inc.

Johnson, N. L., Kotz, S., and Balakrishnan, N. (1995),
*Continuous Univariate Distributions -2, Second Edition*, New York:
John Wiley & Sons, Inc.

Johnson, N. L., Kotz, S., and Pearn, W. L. (1994),
"Flexible Process Capability Indices",
*Pakistan Journal of Statistics*, 10(1)A, 23 -31.

Kane, V. E. (1986),
"Process Capability Indices,"
*Journal of Quality Technology*,
1, 41 -52.

Kotz, S. and Johnson, N. L. (1993),
*Process Capability Indices*, London:
Chapman & Hall.

Kotz, S. and Lovelace, C. R. (1998),
*Process Capability Indices in Theory and Practice*,
London: Arnold.

Kushler, R. H. and Hurley, P. (1992),
"Confidence Bounds for Capability Indices,"
*Journal of Quality Technology*, 24, 188 -195.

Lehmann, E. L. (1975),
*Nonparametrics: Statistical Methods Based on Ranks*,
San Francisco: Holden-Day, Inc.

Mage, D. T. (1980),
"An Explicit Solution for *S*_{B} Parameters Using Four Percentilel
Points,"
*Technometrics*, 22, 247 -251.

Montgomery, D. (1996),
*Introduction to Statistical Quality Control,
Third Edition*,
New York: John Wiley & Sons, Inc.

Odeh, R. E. and Owen, D. B. (1980),
*Tables for Normal Tolerance Limits,
Sampling Plans, and Screening*,
New York: Marcel Dekker, Inc.

Owen, D. B. and Hua, T. A. (1977),
"Tables of Confidence Limits on the Tail
Area of the Normal Distribution,"
*Communication and Statistics, Part B--Simulation
and Computation*, 6, 285 -311.

Pearn, W. L., Kotz, S., and Johnson, N. L. (1992),
"Distributional and Inferential Properties of Process
Capability Indices,"
*Journal of Quality Technology*, 24, 216 -231.

Rodriguez, R. N. (1992),
"Recent Developments in Process Capability Analysis,"
*Journal of Quality Technology*, 24, 176 -187.

Rousseeuw, P. J. and Croux, C. (1993),
"Alternatives to the Median Absolute Deviation,"
*Journal of the American Statistical Association*,
88, 1273 -1283.

Royston, J. P. (1982),
"An Extension of Shapiro and Wilk's W Test for
Normality to Large Samples,"
*Applied Statistics*, 131, 115 -124.

Royston, J. P. (1992),
"Approximating the Shapiro-Wilk's W Test for Nonnormality",
*Statistics and Computing,*
2, 117-119.

SAS Institute Inc. (1999), *SAS/GRAPH Software:
Reference, Version 8*,
Cary, NC: SAS Institute Inc.

SAS Institute Inc. (1999), *SAS Language
Reference: Dictionary, Version 8*,
Cary, NC: SAS Institute Inc.

Shapiro, S. S. and Wilk, M. B. (1965),
"An Analysis of Variance Test for Normality
(Complete Samples),"
*Biometrika*, 52, 591 -611.

Slifker, J. F. and Shapiro, S. S. (1980),
"The Johnson System: Selection and Parameter Estimation,"
*Technometrics*, 22, 239 -246.

Stephens, M. A. (1974),
"EDF Statistics for Goodness of Fit and Some
Comparisons,"
*Journal of the American Statistical Association*,
69, 730 -737.

Terrell, G. R. and Scott, D. W. (1985),
"Oversmoothed Nonparametric Density Estimates,"
*Journal of the American Statistical Association*,
80, 209 -214.

Tukey, J. W. (1977),
*Exploratory Data Analysis*, Reading, MA:
Addison-Wesley Publishing Co., Inc.

Tukey, J. W. and McLaughlin, D. H. (1963),
"Less Vulnerable Confidence and Significance
Procedures for Location Based on a Single Sample:
Trimming/Winsorization 1,"
*Sankhya A*, 25, 331 -352.

Velleman, P. F. and Hoaglin, D. C. (1981),
*Applications, Basics, and Computing of Exploratory
Data Analysis*, Boston, MA:
Duxbury Press.

Wadsworth, H. M., Stephens, K. S., and Godfrey, A. B. (1986),
*Modern Methods for Quality Control and Improvement*,
New York: John Wiley & Sons, Inc.

Wainer, H. (1974),
"The Suspended Rootogram and Other Visual Displays:
An Empirical Validation,"
*The American Statistician*,
28, 143 -145.

Wilk, M. B. and Gnanadesikan, R. (1968),
"Probability plotting methods for the analysis of data,"
*Biometrika*, 49, 525 -545.

Wright, P. A. (1995),
"A Process Capability Index Sensitive to Skewness,"
*Journal of Statistical Computation and Simulation,*
52, 195 -203.

Zhang, N. F., Stenback, G. A., Wardrop, D. M.
(1990),
"Interval Estimation of Process Capability
Index Cpk,"
*Comm. in Stat. Theory and Methods*, 19, 4455 -4470.

Book Contents |
Previous |
Next |
Top |