SAS Companion for the OS/390 Environment

# Representation of Numeric Variables

Under OS/390, floating-point representation (unlike scientific notation) uses a base of 16 rather than base 10. IBM mainframe systems all use the same floating-point representation, which is made up of 4, 8, or 16 bytes. SAS always uses 8 bytes, as follows:

```SEEEEEEE MMMMMMMM MMMMMMMM MMMMMMMM
byte 1   byte 2   byte 3   byte 4
MMMMMMMM MMMMMMMM MMMMMMMM MMMMMMMM
byte 5   byte 6   byte 7   byte 8```

This representation corresponds to bytes of data, with each character occupying 1 bit. The S in byte 1 is the sign bit of the number. If the sign bit is 0, the number is positive. Conversely, if the sign bit is one, the number is negative. The seven E characters in byte 1 represent a binary integer that is known as the characteristic. The characteristic represents a signed exponent and is obtained by adding the bias to the actual exponent. The bias is defined as an offset that is used to allow for both negative and positive exponents with the bias representing 0. If a bias was not used, an additional sign bit for the exponent would have to be allocated. For example, IBM mainframes employ a bias of 40 (base 16). A characteristic with the value 42 (base 16) represents an exponent of +2 (base 16), whereas a characteristic of 3D (base 16)represents an exponent of -3 (base 16).

The remaining M characters in bytes 2 through 8 represent the bits of the mantissa. There is an implied radix point before the most significant bit of the mantissa, which also implies that the mantissa is always strictly less than 1. The term radix point is used instead of decimal point because decimal point implies that we are working with decimal (base 10) numbers, which may not be the case.

The exponent has a base associated with it. Do not confuse this with the base in which the exponent is represented. The exponent is always represented in binary, but the exponent is used to determine what power of the exponent's base should be multiplied by the mantissa. In the case of the IBM mainframes, the exponent's base is 16.

Each bit in the mantissa represents a fraction whose numerator is 1 and whose denominator is a power of 2. For example, the most significant bit in byte 2 represents 1/2**1, the next most significant bit represents 1/2**2, and so on. In other words the mantissa is the sum of a series of fractions such as 1/2, 1/4, 1/8, and so on. Therefore, in order for any floating-point number to be represented exactly, you must be able to express it as the previously mentioned sum. For example, 100 is represented as the following expression:

`(1/4 + 1/8 + 1/64) * (16**2)`

The following two examples illustrate how the above expression is obtained. The first example is in base 10. In decimal notation, the value 100 is represented as follows:

`100.`

The period in this number is the radix point. The mantissa must be less than 1; therefore, you normalize this value by shifting the number three places to the right, which produces the following value:

`.100`

Because the number was shifted three places to the right, 3 is the exponent, which results in the following expression:

`.100*(10**3)=100`

The second example is in base 16. In hexadecimal notation, 100 (base 10) is written as follows:

`64.`

The period in this number is the radix point. Shifting the number two places to the left produces the following value:

`.64`

Shifting the number two places also indicates an exponent of 2. Rewriting the number in binary produces the following value:

`.01100100`

Finally, the value .01100100 can be represented in the following expression:

`(1/2)**2 + (1/2)**3 + (1/2)**6 = 1/4 + 1/8 + 1/64`

In this example, the exponent is 2 (base 10). To represent the exponent, you add the bias of 64 (base 16) to the exponent. The hexadecimal representation of the resulting value, 66, is 42. The binary representation is as follows:

```01000010 01100100 00000000 00000000
00000000 00000000 00000000 00000000```

Floating-point numbers that have negative exponents are represented with characteristics that are less than 40 (base 16). When you subtract 40 from a number that is less than 40, the difference is a negative value that represents the exponent. An example of such a number is the floating-point representation of .03125 (base 10), which is

`'3F80000000000000'x`

Subtracting 40 (base 16) from the characteristic 3F (base 16) gives an exponent of -1 (base 16). This exponent is applied to the 14-digit fraction, 80000000000000 (base 16), giving a value of .08 (base 16), which is equal to .03125 (base 10).

 Representation of Integers

You can use the IBw.d informat and format to read and write the binary integer values used under OS/390. Each integer uses 4 bytes (32 bits) of storage space; thus, the range of values that can be represented is from -2,147,483,648 to 2,147,483,647.