HomeAgendaPeopleProjectsPublicationsLab ResourcesClassesIEM Home
Publications
Journal Publications

Published
1. S.T.S. Bukkapatnam, S.R.T. Kumara and A. Lakhtakia, "Dependence of computed trajectories on the step size in a nonlinear dynamic system: An investigation into cutting tool dynamics," IIE Transactions, Vol. 27, pp. 519-529, 1995.

2. S.T.S. Bukkapatnam, A. Lakhtakia and S.R.T. Kumara, "Analysis of sensor signals shows turning on a lathe exhibits low-dimensional chaos," Physical Review E, Vol. 52, No. 3, pp. 2375-2387, 1995.

3. S.T.S. Bukkapatnam, A. Lakhtakia and S.R.T. Kumara, "Chaos theory based optimal cutting tool chatter control," Speculations in Science and Technology, Vol. 19, pp. 137-148, 1996.

4. S.T.S. Bukkapatnam, A. Lakhtakia and S.R.T. Kumara, "Chaotic neurons for on-line quality control in manufacturing," International Journal of Advanced Manufacturing Technology, Vol. 13, pp. 95-100, 1997.

5. S. V. Kamarthi, S. Pittner and S.T.S. Bukkapatnam, "Foundations of analytical models of staircase traversal for convex polygonal surfaces," International Journal of Production Research, Vol. 35, No. 7, pp. 2009-2027, 1997.

6. S.T.S. Bukkapatnam, S.R.T. Kumara and A. Lakhtakia, "Analysis of acoustic emission signals in machining," ASME Transactions Journal of Manufacturing Science and Engineering, Vol. 121, No. 4, pp. 568-573, 1999.

7. S.T.S. Bukkapatnam, S.R.T. Kumara and A. Lakhtakia, "Local eigenfunctions-based suboptimal wavelet packet representation of contaminated chaotic signals," IMA Journal of Applied Mathematics, Vol. 63, No. 2, pp. 149-160, 1999.

8. S.T.S. Bukkapatnam, S.R.T. Kumara and A. Lakhtakia, "Real-time chatter control in machining using chaos theory," CIRP Journal of Manufacturing Systems, Vol. 29, No. 4, pp. 321-326, 1999.

9. S. V. Kamarthi, S.T.S. Bukkapatnam and S. Hsieh, "An algorithm for near-optimal cutter path generation in stair-case milling of convex polygonal surfaces," ASME Transactions Journal of Manufacturing Science and Engineering, Vol. 122, pp. 182-189, 2000.

10. S.T.S. Bukkapatnam, S.R.T. Kumara and A. Lakhtakia, "Fractal estimation of flank wear in machining," ASME Transactions Journal of Dynamic Systems Measurement and Control, Vol. 122, pp. 89-94, 2000.

11. B. Khoshnevis, S.T.S. Bukkapatnam, H. Kwon, and J. Saito, "Experimental investigation into contour crafting of uncured ceramic materials," Rapid Prototyping Journal, Vol. 7, No. 1, pp. 32-41, 2001.

12. T. Loh, S. Bukkapatnam, D. Medeiros, and H. Kwon, "A new GA for simultaneous sequence and layout planning for PCB assemblies," Computers and Industrial Engineering, Vol. 40, pp. 293-307, 2001.

13. B. Khoshnevis, R. Russell, H. Kwon, and S.T.S. Bukkapatnam, "Crafting large prototypes," A featured refereed publication in a Special Issue of IEEE Robotics and Automation Magazine, Vol. 8, No. 3, pp. 33-42, 2001.

14. R. Palanna and S.T.S. Bukkapatnam, "Concept of model-based tampering for improved process performance," International Journal of Machining Sciences and Technology, Vol. 6, No. 2, pp. 271-290, 2002.


15. H. Kwon, S.T.S. Bukkapatnam, B. Khoshnevis, and J. Saito. "Effect of orifice geometry on surface quality in contour crafting," Rapid Prototyping Journal, Vol. 8, No. 3, pp. 147-160, 2002.

16. S.T.S. Bukkapatnam, S.R.T. Kumara, A. Lakhtakia, and P. Srinivasan, "Neighborhood method and its coupling with the wavelet method for nonlinear signal separation of contaminated chaotic time-series data," Signal Processing, Vol. 82, No. 10, pp. 1351-1374, 2002.

17. J. Zhao, S.T.S. Bukkapatnam, M.M. Dessouky, “Distributed architecture for real-time coordination of bus holding in transit networks,” IEEE Transactions on Intelligent Transportation Systems, Vol. 4, No. 1, pp. 43-51, 2003.

18. R. Palanna, S.T.S. Bukkapatnam, F.S. Settles, “Model-based tampering for improved process performance: Application to grinding of shafts,” SME Journal of Manufacturing Processes, Vol. 5, No. 1, pp. 24-32, 2003.

19. S.T.S. Bukkapatnam and R. Palanna, "Experimental characterization of nonlinear dynamics underlying cylindrical grinding process," ASME Transactions Journal of Manufacturing Science and Engineering, 2004.

20. D. Chang and S.T.S. Bukkapatnam, “Microdynamics of acoustic emission generation in machining,” International Journal of Machining Sciences and Technology, 2004.

 

21. S.T.S. Bukkapatnam and R. Palanna, "Experimental characterization of nonlinear dynamics underlying cylindrical grinding process," ASME Transactions Journal of Manufacturing Science and Engineering, Vol. 126, No. 2, pp. 341-344, 2004.


22. P.M. Agrawal, A.N.A. Samadh, L.M. Raff, M. Hagan, S.T.S. Bukkapatnam, R. Komanduri, “Prediction of molecular-dynamics simulation results using feedforward neural networks: Reaction of a C2 dimer with an activated diamond (100) surface,” Journal of Chemical Physics, Vol. 123, Article No. 224711, 2005.


23. S.T.S. Bukkapatnam and K. Sadananda, “A genetic algorithm for predictive modeling of fatigue crack growth using unified approach,” International Journal of Fatigue, Vol. 27, pp. 1354-1359, 2005.


24. S.T.S. Bukkapatnam, J. M. Nichols, M. Seaver, S. T. Trickey and M. Hunter, “A wavelet-based, distortion energy approach to structural health monitoring,” Structural Health Monitoring Journal, Vol. 4, No. 3, 247-258, 2005.
 

25. P. Ge, S. C-Y. Lu, and S.T.S. Bukkapatnam, “A direct synthesis method for early-stage parametric design of large-scale mechanical systems,” ASME Transactions Journal of Mechanical Design, 2005.


26. J. Zhao, M.M. Dessouky, S.T.S. Bukkapatnam, “Optimal scale time for schedule based transit operations,” Transportation Science, Vol. 40, pp. 529-539, 2006.


Accepted for publication
 

26. S.T.S. Bukkapatnam and B. Clark, “Modeling and monitoring of Contour Crafting, a layered manufacturing process,” ASME Transactions Journal of Manufacturing Science and Engineering, 2006.


27. W. Lih, S. Bukkapatnam, P. Rao, M. Hagan, N. Chandrasekaran, R. Komanduri, “Neural networks and fuzzy inference systems for modeling CMP,” IEEE Transactions on Automation Science and Engineering,2006.


28. S.T.S. Bukkapatnam, “Piecewise eigen-analysis for noise reduction and feature extraction in contaminated chaotic signals,” Physical Review E, 2006 (subject to revisions).


29. P. Rao, S. Bukkapatnam, W. Lih, M. Hagan, N. Chandrasekaran, R. Komanduri, “Statistical analysis of oxide CMP,” Applied Physics A,2006.


30. V. Rajamani, S. Bukkapatnam, C. Bunting, “An experimental study on improving item-level RFID tag readability in the presence of metals and liquids,” International Journal of RFID Applications, 2006 (subject to revisions).


31. S.T.S. Bukkapatnam, P.M. Agrawal, M.M. Malshe, L.M. Raff, M. Hagan, R. Komanduri, “Parametrization of interatomic potential functions using a genetic algorithm accelerated with a neural network,” Physical Review B, 2006.


32. J. Govardhan, S. Bukkapatnam, P. Rao, Y. Bhamare, V. Rajamani, “Statistical analysis and design of RFID systems for monitoring vehicle ingress/egress in warehouse environments,” International Journal of RFID Applications, 2006.


Under Review
33. M.S. Fofana and S.T.S. Bukkapatnam, “Hopf bifurcations in aerospace drilling processes,” Journal of Nonlinear Science, 2002.


34. P. Ge, S. C-Y. Lu, and S.T.S. Bukkapatnam, “Study of an axiomatic approach for parametric design of mechanical systems,” Design Review, 2005.


35. L.M. Raff, M. Hagan, S.T.S. Bukkapatnam, P.M. Agrawal, M.M. Malshe, R. Komanduri, “Optimization of neural networks for estimating ab initio molecular dynamic potentials,” Journal of Chemical Physics, 2006.


36. W. Lih, S. Bukkapatnam, N. Chandrasekaran, R. Komanduri, “An evolutionary algorithm for modeling and optimization of chemical mechanical planarization,” International Journal of Machine Tools and Manufacture, 2006.


37. R. Liao, S. Bukkapatnam, R. Komanduri, “Wireless RFID vibration sensor network for container integrity monitoring,” IEEE Transactions on Automation Science and Engineering, 2006.


38. J. Govardhan, S. Bukkapatnam, V. Rajamani, C. Bunting, “Improving read rates of RFID tags in metallic environments using a reverberation chamber,” International Journal of RFID Applications, 2006


39. J. Govardhan, S. Bukkapatnam, “Estimating read-rate probability in backscatter RFID systems,” IEEE Antenna Theory and Applications, 2006.


40. P. Rao, S. Bukkapatnam, N. Chandrasekaran, R. Komanduri, “Nonlinear stochastic dynamics and monitoring of Chemical Mechanical Planarization process,” Physical Review E, 2006.


41. S. Hariharan and S.T.S. Bukkapatnam, “Improving Decision-Making through RFID: Application of POMDP to Warehouse Search Operations,” International Journal of Distributed Sensor Networks, 2006.


Working papers
 

42. S.T.S. Bukkapatnam and S.R.T. Kumara, "Experimental observations on instabilities in machining dynamics," for submission to International Journal of Machining Sciences and Technology, 2002.


43. S.T.S. Bukkapatnam, "Sensor-based modeling of EEG can identify an alcoholic," ISE Working Paper 98-03.


44. S.T.S. Bukkapatnam, S.R.T. Kumara and A. Lakhtakia, "Sensor-based modeling and nonlinear real-time chatter control in turning using chaos theory," ISE Working Paper 98-02, USC, 1998.


45. S.T.S. Bukkapatnam and N. Gadgil, “Dynamics of emergency supply networks,” ISE-Working Paper, 2003.


46. S.T.S. Bukkapatnam, J. Nichols, M. Seaver, and S. Tricky, “Application of piecewise eigen-representations for sensor-based anomaly detection,” Working Paper, 2004.


47. P.M. Agrawal, L.M. Raff, S.T.S. Bukkapatnam, R. Komanduri, “Molecular dynamic modeling of CMP process,” being prepared for Physical Review B.


48. S.T.S. Bukkapatnam, G.S. Raj and S.C-Y. Lu, "Conceptualization of computational architecture for lean manufacturing machine systems," Journal of Flexible Automation and Integrated Manufacturing, ISE Working Paper 98-04, 1999.


49. S.T.S. Bukkapatnam and H. Knapp, "Optimal wavelet decompositions for near periodic signals using lifting schemes," IEEE Transactions on Signal Processing 1999 (Under 2nd Review) (ISE Working Paper 99-01).


50. R. Palanna and S.T.S. Bukkapatnam, “Integration of grinding models using bipartite graphs,” International Journal of Machining Sciences and Technology, 2002.

 

 

Refereed Conference Proceedings

1. S.T.S. Bukkapatnam, S.R.T. Kumara and A. Lakhtakia, "Fractal estimation of flank wear in turning using time-delay neural networks," Intelligent Engineering Systems through Artificial Neural Networks, Dagli, C., Fernandez, B., Ghosh, J., and Kumara, S. R. T. (eds.), ASME Press, New York, pp. 575-580, 1994 (Won First Runner-up prize in the Novel Applications Category).


2. S.T.S. Bukkapatnam, A. Lakhtakia and S.R.T. Kumara, "The concept of chaos theory based optimal cutting tool chatter control," Proceedings of SPIE Conference, No. 2595, pp. 2-10, Philadelphia, PA, October 1995.


3. S.T.S. Bukkapatnam, A. Lakhtakia, S.R.T. Kumara and G. Satapathy, "Characterization of nonlinearity of cutting tool vibrations and chatter," Proceedings of ASME International Mechanical Engineering Congress and Exposition, Materials Division, pp. 1209-1223, San Francisco, CA, November 1995.


4. S.R.T. Kumara, S.T.S. Bukkapatnam and A. Lakhtakia, "Theory of chaos based techniques for process monitoring," Proceedings of Industrial Engineering Research Conference, pp. 223-228, Minneapolis, MN, May 1996.


5. S.T.S. Bukkapatnam, S.R.T. Kumara and A. Lakhtakia, "Analysis of acoustic emission in machining," Proceedings of Industrial Engineering Research Conference, pp. 450-455., 1997.


6. S.T.S. Bukkapatnam, S.R.T. Kumara and A. Lakhtakia, "Sensor-based real-time nonlinear chatter control in machining," Proceedings of The 31st CIRP International Seminar on Manufacturing Systems, Berkeley, CA, 1998.


7. S.T.S. Bukkapatnam, G.S. Raj and S.C-Y. Lu, "Conceptualization of computational architecture for lean manufacturing machine systems," Proceedings of International Conference on Agile Manufacturing, Minneapolis, MN, 1998.


8. Bukkapatnam, S., and Kumara, S., "Chaos Theory Based Process Monitoring Techniques for Intelligent Integrated Diagnostics," In the Proceedings of International Workshop on Soft Computing, ISI, India, January 1998.


9. Li, D., S. C-Y. Lu, S. Bukkapatnam, and J. Pien "Building System Level Models for Spray Forming Process," Proceedings of the ACLOA Owen Richmond Symposium, Pittsburgh, PA, July, 1998.


10. S.T.S. Bukkapatnam, "Compact nonlinear signal representation in machine tool operations," ASME Design Engineering and Technology Conference, DETC-VIB 8068, September 12-15, Las Vegas, NV, 1999.


11. S. C-Y. Lu, S.T.S. Bukkapatnam, P. Ge, and N. Wang, "Backward mapping methodology for design synthesis", Proceedings of 1999 ASME Design Engineering Technical Conference, DETC99/DTM-8766, September 12-15, Las Vegas, Nevada, USA, 1999.


12. S.T.S. Bukkapatnam and M. Fofana, "Analysis of delay differential equation model of machining dynamics," Proceedings of Flexible Automation and Intelligent Manufacturing FAIM 2000, pp. 145-154, College Park, Maryland, June 2000.


13. S.T.S. Bukkapatnam and H. Gao, "Effect of reinforcement learning on the coordination of multiagent systems," Proceedings of SPIE Photonics East Conference, Boston, MA, 2000.


14. J. Zhao, M.M. Dessouky, S.T.S. Bukkapatnam, "Distributed holding control of bus transit operations," Proceedings of IEEE Intelligent Transportation Systems Conference, Oakland, CA, August 2001.


15. M. Fofana and S.T.S. Bukkapatnam, "Hopf bifurcation in machining dynamics," Proceedings of 2000 ASME Design Engineering Technical Conference, Pittsburgh, PA, September 2001.


16. P. Ge, S. C-Y. Lu, and S.T.S. Bukkapatnam, "A direct synthesis method for early-stage parametric design of large-scale mechanical systems", Proceedings of ASME 2002 Design Engineering Technical Conferences DETC2002/DTM-34006, September 29 - October 2, Montreal, Canada, 2002.


17. R. Palanna, and S.T.S. Bukkapatnam, "Model-based tampering for improved process performance: Application to grinding of shafts," Transactions of NAMRI/SME, 2002 (A version published in SME Journal of Manufacturing Processes, 2003).


18. S.T.S. Bukkapatnam and S. Kumar, “Analysis of fatigue crack growth using a genetic algorithm,” International Conference On Fatigue Damage Of Structural Materials V, 19 – 24 September 2004, Hyannis Resort, MA, USA.


19. R. Palanna and S.T.S. Bukkapatnam, “Integration of models of complex systems using bipartite graphs: Application to grinding process,” ICCS 2004 Conference, Boston, MA, 2004.


20. S. T. S. Bukkapatnam and D. Chang “A statistical mechanistic model of acoustic emission generation in shear zone of machining,” Transactions of NAMRI/SME, 2005.


21. S.T.S Bukkapatnam, W. Lih, P. Rao, N. Chandrasekaran, R. Komanduri, “Modeling of MRR and WIWNU characteristics in oxide CMP using sparse data,” CMP MIC 06, San Francisco, March 2006.


22. A. Awawdeh, S. T.S. Bukkapatnam, S.R.T. Kumara, C. Bunting, R. Komanduri, “Wireless sensing of flow-induced vibrations for pipeline integrity monitoring,” IEEE SAM 06, Boston, July 2006.


23. S. Earni and S.T.S. Bukkapatnam, “Towards performance analysis of manufacturing systems using nonlinear dynamics principles,” Proceedings of SAE, 2006.


24. S. Hariharan and S.T. Bukkapatnam, “A partially observable Markov decision process for RFID-driven search for missing items in a warehouse,” IEEE International Conference on RFID, 2006 (submitted).


25. J. Govardhan and S.T. Bukkpatnam, “A probabilistic model for estimating read-rates of an RFID system,” IEEE International Conference on RFID, 2006 (submitted).
 

 

Conference Proceedings Refereed by Abstract or Non-refereed and Invited Presentations

1. S.R.T. Kumara, A. Lakhtakia and S.T.S. Bukkapatnam, "Development of theory of chaos based machine tool monitoring systems," Proceedings of NSF Grantees Conference, pp. 171-172, 1994.


2. S.R.T. Kumara, S.V. Kamarthi, S.T.S. Bukkapatnam and J.W. Lee, "Sensor based monitoring for real-time quality control in manufacturing," Proceedings of AAAI-94 Spring Symposium, 1994.


3. S.R.T. Kumara, A. Lakhtakia and S.T.S. Bukkapatnam, "Theory of chaos and neural networks in process monitoring," Proceedings of ORSA/TIMS Conference, Detroit, Oct. 22-24 1994.


4. S.T.S. Bukkapatnam, S.R.T. Kumara and A. Lakhtakia, "Chaos in the turning operation on a lathe: Implications for monitoring and control," Proceedings of NSF Grantees Conference, pp. 393-394 1995.


5. S.T.S. Bukkapatnam, A. Lakhtakia and S.R.T. Kumara, "Model of turning dynamics using chaos theory," Proceedings of McNu 97 Conference, Evanston, IL, pp. 363, 1997.


6. S.T.S. Bukkapatnam, "Sensor-based characterization and modeling of damage in heterogeneous structures," Industrial Engineering Research Conference, Banff, Canada, 1998.


7. B. Khoshnevis and S.T.S. Bukkapatnam, "Experimental investigations into contour crafting: A rapid prototyping process," 1999 Proceedings of NSF Design and Manufacturing Grantees Conference, Long Beach, CA, 1999.


8. B. Khoshnevis, S.T.S. Bukkapatnam, H. Kwon, J. Saito, "New developments in contour crafting using uncured ceramic materials," Proceedings of NSF USA-China Workshop on Advanced Machine Tool Research, Los Angeles, CA, 1999


9. S.T.S. Bukkapatnam, "Microdynamic modeling of acoustic emission generation in machining," Proceedings of FAIM 2000, College Park, Maryland, June 2000.


10. B. Khoshnevis, S.T.S. Bukkapatnam, H. Kwon, J. Saito, N. Dambal, "Effect of orifice shape on quality in Contour Crafting," Proceedings of American Ceramic Society Conference, San Francisco, Jan 2000.


11. S.R.T. Kumara, S.T.S. Bukkapatnam and A. Lakhtakia, "Chaos theory based dynamic data mining," Proceedings of Joint Statistical Meetings, Indianapolis, Nov 2000.


12. B. Clark and S.T.S. Bukkapatnam, “Modeling of Contour Crafting dynamics,” INFORMS Conference, San Jose, Nov 2002.


13. S.T.S. Bukkapatnam and D. Chang, “Simulation of acoustic emission generation in machining,” Industrial Engineering Research Conference, Portland, 2003.


14. S.T.S. Bukkapatnam and N. Gadgil, “Nonlinear dynamics of emergency supply networks,” Industrial Engineering Research Conference, Portland, 2003.


15. S.T.S. Bukkapatnam, “Sensor-based modeling of nonlinear stochastic processes,” SIAM Conference, Snowbird, Utah, 2003.


16. S.T.S. Bukkapatnam, “Sensor-based degradation monitoring: A nonlinear dynamic systems approach,” Invited presentation at the Naval Research Lab, Washington, DC, 2003.


17. S.T.S. Bukkapatnam, “Sensor-based modeling: A new approach for pipeline noise characterization and separation,” Invited presentation at Department of the Interior, Mining Management Service, Herndon, VA, 2003.


18. S.T.S. Bukkapatnam, “Sensor-based modeling: A new approach for process degradation monitoring,” Invited presentation at INFORMS Conference, Atlanta, GA, 2003.


19. S.T.S. Bukkapatnam, “Sensor-based modeling approach to system degradation monitoring,” Invited presentation at University of Arizona, Tucson, 2003.


20. S.T.S. Bukkapatnam, “Sensor-based modeling approach: A dynamic systems approach to structural health monitoring,” Invited presentation at INFORMS Conference, Denver, CO, 2004.


21. S.T.S. Bukkapatnam, “Recurrence Quantification Analysis based Feature Extraction in Complex Systems,” Invited presentation at INFORMS Conference, Denver, CO, 2004.


22. S. Kumara, S.-G. Kim, X. Zhang and S.T.S. Bukkapatnam, ”Self-sustainable sensor networks for process and infrastructure integrity monitoring,” Proceedings of NSF DMII Grantees Conference, Jan 2005.


23. S.T.S. Bukkapatnam, “A dynamic systems approach to network intrusion monitoring,” invited presentation at the Oklahoma State University, Computer Science Department Seminar Series, November 2004.


24. S.T.S. Bukkapatnam, “Sensor-based modeling: Towards new quality monitoring foundations for precision manufacturing machine operations,” Invited presentation at Northeastern University, Mechanical and Industrial Engineering Colloquium Series, December 2004.


25. S.T.S. Bukkapatnam, “Sensor-based monitoring of nonlinear stochastic systems,” MCEC Meeting, Oklahoma State University, February 2005.


26. S.T.S. Bukkapatnam, “Sensor-based monitoring of precision grinding operations,” CIRP General Assembly, August 2005.


27. S.T.S. Bukkapatnam, “Statistical analysis and modeling of Chemical and Mechanical Planarization Process,” CIRP General Assembly, August 2005.


28. S.T.S. Bukkapatnam, K. Gopal, R. Komanduri, “Near optimal wavelet representation of complex grinding wheel profiles,” INFORMS Conference, San Francisco, November 2005.


29. S.T.S. Bukkapatnam, P. Rao and R. Komanduri, “Sensor-based modeling and monitoring of surface quality in lapping process,” INFORMS Conference, San Francisco, November 2005.


30. S.T.S. Bukkapatnam, J. Govardhan, “A statistical analysis approach for designing RFID systems,” CELDi Fall Meeting, Louisville, November 2005.


31. S.T.S. Bukkapatnam, R. Liao, ”Container integrity monitoring using a wireless (RF) vibration sensor array,” INFORMS Annual Meeting, Pittsburgh, November 2006.


32. S.T.S. Bukkapatnam, R. Komanduri, S. R. T. Kumara, ”Real-time monitoring of material removal rates in chemical mechanical planarization (CMP) process using a wireless vibration sensor array,” INFORMS Annual Meeting, Pittsburgh, November 2006.
 

 

Books/Book Chapters/Technical Reports

1. S.R.T. Kumara, S.T.S. Bukkapatnam and A. Lakhtakia, "Chaos theory-based process monitoring techniques for intelligent integrated diagnostics," Handbook of Soft Computing, Indian Statistical Institute, 1998.

2. S.T.S. Bukkapatnam and S. C-Y. Lu (Editors), Proceedings of USA-China Workshop on Advanced Machine Tool Research, NSF Report, 1999.

3. S.T.S. Bukkapatnam and H. Gao, "Effect of reinforcement learning on the coordination of multiagent systems," Network Intelligence: Internet-based manufacturing (SPIE 4208), N.M. Berry (ed), pp. 31-41, 2000.

4. B. Khoshnevis, H. Kwon, S.T.S. Bukkapatnam, and R. Russel, "Contour Crafting: A layered fabrication technique," In Prototyping for Robotics and Automation, Eds: T. Sobh and K.M. Lee, IEEE Press (In Press).

 

Technical Reports

1. S.T.S. Bukkapatnam, J. Govardhan, V. Rajamani, S. Hariharan, B. Gardner, “Laboratory for RFID Performance Benchmarking,” CELDi Technical Report, 2005.


2. S.T.S. Bukkapatnam, J. Govardhan, V. Rajamani, S. Hariharan, B. Gardner, Andrew C., “Strategic imperative, competitive technologies and high-level economic analysis of AIT in FAA Logistics Center,” Report submitted to FAA LC, 2005.

 

 

  Contact Us                                                                                                   Oklahoma State University