|
List of Recent Publications
|
PUBLICATIONS
- Ikawa, N., Donaldson, R.R., Komanduri, R., Konig, W., McKeown, P.A., Moriwaki,
T., and I.F. Stowers, "Ultra-precision Metal Cutting - the Past, the Present,
and the Future", Annals of the CIRP, 40, 2, (1991) 487-494.
- Komanduri, R., and S. Nandyal, "Low Pressure Synthsis of Polycrystalline
Diamond Abrasive", Int J Mach Tool. Manufact, 33, No.2 (1993) 285-296
- Komanduri, R. et. al., "Polycrystalline Diamond Films and Single Crystal
Diamonds Grown by Combustion Synthesis", Annals of the CIRP, 39, 1, (1990)
585-588.
- Komanduri, R. K., Snail, K. S., and Fehrenbacher, L. L., "Growth of Diamond
Crystals by Combustion Synthesis," Philosophical Magazine Letters, 62, 4, 1990,
pp. 283-290.
- Lucca, D. A., Rhorer, R. L., and Komanduri, R., "Energy Dissipation in the
Ultraprecision machining of Copper", Annals of the CIRP, 40/1, (1991 ) 69-72.
- Noori-Khajavi, A. and R. Komanduri, "On Multisensor Approach to Drilling,"
Annals of the C.I.R.P. 42/1(1993) 71-74
- Noori-Khajavi, A. and R. Komanduri, "Frequency and Time Domain Analyses of
Sensor Signals in Drilling. Part 1 : Correlation With Drill Wear," Part 2:
Investigation of the Problems Associated with Sensor Integration," Int. J of
Machine Tools and Manufacture 15, No.6 (1995) 775-815
- Komanduri, R., "Machining and Grinding - A Historical Review of Classical
Papers," ASME Applied Mechanics Review, 46, No. 3 (March 1993) 80-132
- Komanduri, R., "Machining of Fiber Reinforced Composites.," ASME Mechanical
Engineering, 115, No.4 (April 1993) 58-64
- Komanduri, R., Merchant, M.E.and M. C. Shaw," Symposium on U.S. Contributions
to Machining and Grinding Research in the 20th Century," ASME Applied Mechanics
Review, 46, No.3 (March 1993) 70-132
- Fox, M., Agarwal, K, Noori-Khajavi, A., Shinmura, T. and R. Komanduri,
"Magnetic Abrasive Finishing of Non-Magnetic Stainless Steel Rods, " Annals of
CIRP 443/1 (1994) 181-184
- Bang, K., Ghajar, A.J., and R. Komanduri, "The Effect of Substrate Surface
Temperature on Morphology and Quality of Diamond Films by Oxy-Acetylene
Combustion Method," Thin Solid Films, 238 (1994) 172-183
- Bhatnagar, N., Ramakrishnan, N., Naik, N. K., and R. Komanduri, "On Machining
of Fiber Reinforced (FRP) Composite Laminates, Int J Manufacturing and Machine
Tools 35, No.5 (1995) 701-716
- Komanduri, R., Umehara, N. and M. Raghunandan, "On the Possibility of
Chemo-Mechanical Polishing of Silicon Nitride by Magnetic Float Polishing,"
Trans ASME, J of Tribology 118 (1994) 721-727
- Hou Zhen Bin and R. Komanduri, "On a Thermo-Mechanical Model of Shear
Instability in Machining," Annals of CIRP 44/1 (1995) 69-73
- Umehara, N. and R. Komanduri," Magnetic Fluid Grinding of Silicon Nitride
Rollers," Wear 192 (1995) 85-93
- Komanduri, R. and Hou Zhen Bing," Mechanics of Chip Formation in High Speed
Machining," Keynote Paper at the Industrial Tooling Conference, Southampton,
(U.K.) September 1995
- Bhagavatula, S. and R. Komanduri," On the Chemo-Mechanical Polishing of
Silicon Nitride with Chromium Oxide Abrasive," Philosophical Magazine, A74, No.1
(1996) 299-305
- Komanduri, R., Lange, J., Wicksted, J., and J. Krasinski,"Ceramic Bearing
Technology Program," WL-TR-96-4020 Final Report Volumes I & II, Material
Directorate, Wright Laboratory, Air Force Material Command, WPAFB, OH (1995)
- Komanduri, R.,"On Material Removal Mechanisms in Finishing of Advanced Ceramics
and Glasses,"Annals of CIRP, 45/1 (1996) 509-1514
MANUSCRIPTS
- Zhen Bing Hou and R. Komanduri," A Thermal Model of Magnetic Abrasive Finishing
(MAF) of Ceramics"
- Zhen Bing Hou and R. Komanduri," A Thermal Model of Magnetic Float Polishing of
Ceramics"
- Zhen Bing Hou and R. Komanduri," On the Relationship between the Maximum
Temperature Rise and the Peclet Number in Moving Plane Heat Source Problems"
- Zhen Bing Hou and R. Komanduri," On a General Solution of Moving Heat Source
Problems,"
- Ming Jiang and R. Komanduri," Finishing of Si3N4 Balls for Bearing
Applications,"
- Narutaki, N., Yamane, Y., Tashima, S., Huroki, H., and R. Komanduri,"A New
Advanced Ceramic for Dry Machining," submitted for publication to the Annals of
CIRP (1997)
- Kurtas, F. M., Fehrenbacher, L. L., andR. Komanduri," Nanocoatings on
Cuttting Tools for Dry Machining," submitted for publication to the Annals of
CIRP (1997)
- Komanduri, R., "Tool Materials," invited review article submitted for
publication in the Encyclopedia of Chemical Technology," John Wiley & Sons
(1996)
- Zhen Bing Hou and R. Komanduri," Modeling of Thermo-Mechanical Shear
Instability in Machining"
- Chandrasekaran, N., Ali-Noori Khajavi, Raff, L. M., and R. Komanduri," A New
Technique for Reducing the Computational Time and Memory in MD Simulation,"
- Ming Jiang and R. Komanduri," Application of Taguchi Method for Optimizing
Polishing Conditions for the finishing of Ceramic Balls for Bearing
Applications"
- Raghunandan, M., and R. Komanduri,"Factors Influencing the Spehericity in
Magnetic Float Polishing (MFP) of Ceramic Balls,"
- Raghunandan, M., and R. Komanduri,"Finishing of Silicon Nitride Balls for
High-Speed Bearing Applications,"
- Raghunandan, M., and R. Komanduri,"Chemo-Mechanical Polishing With Chromium
Oxide Abrasive"
- Raghunandan, M., Noori Khajavi, A., Umehara, N., and R. Komanduri, "Magnetic
Float Polishing of Ceramics,"
This Page was last updated on January 22, 1996